We use cookies on this site to enhance your experience. Find out more here.
/ U45 Recessed trimless
Design: Eduardo Souto de Moura
Recessed trimless luminaire with housing made of aluminium profile with 25micron maximum corrosion resistance anodization with matt finish or with textured electrostatic 100% polyester paint.
Frosted polycarbonate diffuser with user friendly clipping system and double fitting system: flushed or recessed.
Aluminium anodised end caps with matt finish or electrostatic 100% polyester paint with textured-finish.
Fitting accessories ordered separately.
Recessed trimless luminaire with housing made of aluminium profile with 25micron maximum corrosion resistance anodization with matt finish or with textured electrostatic 100% polyester paint.
Frosted polycarbonate diffuser with user friendly clipping system and double fitting system: flushed or recessed.
Aluminium anodised end caps with matt finish or electrostatic 100% polyester paint with textured-finish.
Fitting accessories ordered separately.
| Color temperature | 2700K | CRI | >80 | |
| Beam Angle | Diffuse | LOR | 47% | |
| UGR | <25 | Colour deviation | 3-step MacAdam | |
| Light source power | 68W | Life time | >50.000h, L80/B10 | |
| Light source flux | 11950lm | Control | On/Off | |
| Light source efficiency | 176lm/W | IP rating | 42 | |
| Luminaire power | 80W | IK rating | - | |
| Luminaire flux | 5600lm | Weight | 4,5Kg | |
| Luminaire efficiency | 70lm/W | Wiring | 230Vac | 50/60Hz |
| Color temperature | 2700K |
| Beam Angle | Diffuse |
| UGR | <25 |
| Light source power | 68W |
| Light source flux | 11950lm |
| Light source efficiency | 176lm/W |
| Luminaire power | 80W |
| Luminaire flux | 5600lm |
| Luminaire efficiency | 70lm/W |
| CRI | >80 |
| LOR | 47% |
| Colour deviation | 3-step MacAdam |
| Life time | >50.000h, L80/B10 |
| Control | On/Off |
| IP rating | 42 |
| IK rating | - |
| Weight | 4,5Kg |
| Wiring | 230Vac | 50/60Hz |
Last Update: 21 November, 2022
/ Downloads
/ Accessories
O/M recommends that any false ceilings intended for recessed products should be installed only after the products to be used have been chosen. The same applies when preparing openings for this type of product. O/M recommends reinforcing false ceilings close to any such openings, in accordance with the characteristics of the product to be recessed. The cutout dimensions are for plasterboard ceilings. For other type of material please contact: support@om-light.com